Aviosys IP Power 9223K-D, User Manual

Page: 24 / 27

- 24-
Ref#9223KD0001
Set Power Command
The Set Power command allows you to control the devices on/off through the http commands.
With this command you can integrate can integrate the 9223K-D with any other system.
Outlet Power On Power Off
Output 1 61 = 1 61 = 0
Output 2 62 = 1 62 = 0
Output 3 63 = 1 63 = 0
Output 4 64 = 1 64 = 0
Ex. For Single Port Control On
http://192.168.1.3/set.cmd?cmd=sp61=1
Output: P61=1
Ex. For Single Port Control Off
http://192.168.1.3/set.cmd?cmd=sp61=0
Output: P61=0
Ex. For Multiple Port Control
http://192.168.1.3/set.cmd?cmd=sp61=1+p62=1+p63=1+p64=1
Output: P61=1,P62=1,P63=1,P64=1
Set Delay Power Command
http://IP :port/set.cmd?cmd=sp61=1+p61n=0+t61=30
p61=1+p61n=0+t61=30
means
Output 1 turn ON first and then turn off after 30 seconds
Read Power Command
1. Set P6 On/Off
http://192.168.1.3/set.cmd?cmd=sp61=1 (ON) , sp61=0(OFF)
2. Read P6
http://192.168.1.3/set.cmd?cmd=getpower