To install the 6416Y2 card:
Start with the power to the Yamaha digital device
•
off
.
Remove the Yamaha device’s power cord from the wall
•
receptacle.
Remove the cover plate on the Yamaha
•
device’s expansion
slot to expose the expansion connections.
Discharge any built‑up static charge by touching the metal
•
casing of the host Yamaha unit.
Remove the 6416Y2 card from its protective anti‑static
•
sleeve.
Ensure that the 6416Y2 card DIP switches are set properly
•
for your application at this time.
Slide the 6416Y2 card into place, aligning the sides of the
•
card with the support guides in the MY expansion slot.
Press the 6416Y2 card firmly in place to attach the multi‑
•
pin connectors on the card to those on the expansion slot
backplane on the Yamaha device.
Tighten the thumb screws on the 6416Y2 to secure it.
•
Power up the Yamaha digital device.
•
Connect the 6416Y2 to a Pro64 network.
•
Once the Aviom expansion card has had its DIP switches configured and is
installed in the Yamaha host device, all audio routing to/from the 6416Y2
A‑Net Interface Card is done from within the Yamaha device’s user interface.
Consult the documentation that came with your Yamaha product for more
specific signal routing information.
P
N
ote
:
Always power off the Yamaha host device before removing the
6416Y2 card.
Installing Multiple 6416Y2 Cards
A Yamaha host device can support as many Pro64 A‑Net cards as it has
available MY (mini‑YGDAI) expansion slots and internal power resources.
When multiple 6416Y2 A‑Net Interface Cards are installed in a Yamaha host
device, each 6416Y2 card needs to be connected via its A‑Net ports to the
Pro64 network. Simply use a short Cat‑5e jumper cable to interconnect the
6416Y2 cards.
A list of compatible Yamaha products and the number of available MY
expansion slots on each appears on page 4.
6
i
nstallinG
the
6416Y2 C
ard
