5. Restoring the NVR
When all the components have been installed, restore the removed components and close the cover.
1. Reinstall the components that were immediately over the CPU.
l
(Premium recorder) Reinstall the mid-plane hard disk tray. Make sure the SAS and power
cables are all reconnected.
l
(Standard recorder) Restore the cooling shroud and butterfly riser slot.
2. Close and lock the recorder cover.
3. Reconnect all the cables to the recorder.
4. Power the recorder and log in to confirm the system is running properly.
© 2019, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER and ACC are trademarks of Avigilon Corporation. Other names
or logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not
a disclaimer of ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America and other jurisdictions
worldwide (see
). Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other
intellectual property rights of Avigilon Corporation or its licensors.
Avigilon Corporation
avigilon.com
PDF-NVR4-2NDCPUKIT-A
Revision: 2 - EN
20190122
5. Restoring the NVR
11
