Note:
This illustration shows how a card is installed in slot 1 and then how the
expansion card latch is closed. The technique to install the card in slot 2 is the same,
except it is beneath the card in slot 1 and has to be installed first. The card in this
illustration does not match the appearance of the actual card installed in slot 1.
c. Push the expansion card latch closed and re-engage the PCIe Lock .
6. Reattach the NVR5 Cover
When all the components of the kit have been installed:
1. Ensure all expansion card latches are closed and there are filler covers for all empty slots.
2. Close and lock the NVR5 Appliance cover.
3. If the NVR5 Appliance was rack mounted and removed to install the kit, remount it into the rack.
4. Reconnect all the peripherals and cables.
5. Power on the NVR5 Appliance.
6. Reattach the NVR5 Cover
15
