8
EnglishEnglish
The connection status LEDs show the progress in connecting to the
server and are described in the following table.
IP Address Selection
Once connected to a network, the camera will attempt to locate and
obtain an IP address from a DHCP server. If this fails, an IP address
will be selected using Zeroconf (APIPA).
If the IP address is set using Zeroconf, the IP address will be in the
169.254.* subnet. A static IP address can be set from the Avigilon
Control Center software, consult the software user guide for details.
Table:Connection Status LED States
Connection
State
Connection
Status LED
Description
No Link
Off
Not physically connected to any
network device
Obtaining IP
Address
One short
flash every
second
Attempting to obtain an IP address
Connecting to
a server
Two short
flashes every
second
An IP address has been obtained
and is attempting to connect to the
server
Upgrading
Firmware
Two short
flashes and
one long flash
every second
Updating the firmware
Connected
On
Connected to the server
Summary of Contents for 11MP-HD-PRO-C
Page 2: ......
Page 23: ... 9 27 11 Avigilon Corporation ...
