Avidyne IFD410 FMS/GPS, Pilot'S Manual

Page: 355 / 380

IFD400 Series Pilot Guide
General 6-63
DATALOGS DOWNLOAD
Extensive data logging is performed automatically on all IFDs.
These datalogs can be accessed post-flight and used for a
number of purposes.
NOTE
Datalogs Usable But Avidyne Property
The contents of the data logs and the storage
devices that record and store data remain the
property of Avidyne. However, you are free to
download and use the data for your own training and
safety improvement purposes.
There are seven types of datalogs employed in the IFDs:

System Log
– This log provides a record of the
navigation state. From this log, you can re-create many
aspects of the FMS output and IFD state. It logs at a rate
of approximately 1Hz

Flight Log
– This log provides a detailed record of your
aircraft state as measured by the various IFD sensors. It
logs at a rate of approximately 5Hz

Engine Log
– This log provides details on fuel flow
system data (if configured). It logs at a rate of
approximately ¼ Hz

Event Log
– This log contains miscellaneous data such
as all alerts, keystrokes, system status and error
messages, etc. It is designed to be a diagnostics log for
Avidyne Service Center technicians and not expected to
be used by owners/operators. It logs at an on-condition
rate

Voltage Log
– This log contains internal diagnostic data
such as the voltages and currents on sub-system boards,
temperatures and internal fan status. It logs at a rate of
approximately 1Hz

GPS Log
– This log contains extensive internal state
data for the GPS