VENUE SC48 Guide
40
Settings Excluded from Copy and Paste
Input Channels
The following Input channel parameters are
not copied or pasted (the current settings of the destination
channels are retained):
• Patchbay assignments, including Direct Outs
• Channel Name
• Hardware and software insert (plug-ins) assignments and
in/out state.
Output Channels
The following Output channel parameters
are not copied or pasted (the current settings of the destina-
tion channels are retained):
• Patchbay assignments, including Direct Outs
• Channel Name
• Hardware and software insert (plug-in) assignments and
in/out status
• GEQ settings
• Output membership (the assignment of channels to an
Aux, Group VCA, Matrix or PQ).
Make Selected Mono Strips Stereo/Make
Selected Stereo Strip Mono
Combines two selected mono channels into a single stereo
channel, or splits a selected stereo channel into two mono
channels. VENUE must be in Config mode to change the ste-
reo status of a channel.
Move Selected Strip
Moves a selected strip from its current position to a new loca-
tion. When you move a channel strip, other channels are
moved (and renumbered) lower or higher to accommodate
the moved channel.
VENUE must be in Config mode to move channel strips.
To move a fader strip:
1
Put the system in Config mode.
2
Select the channel you want to move.
3
On-screen, right-click on the destination strip (where you
want to move the selected channel).
4
Choose
Move Selected Strip Here
from the pop-up menu.
Insert Blank Strip
The Insert Blank Strip command lets you insert one or more
blank (or “spacer”) strips anywhere among your input chan-
nels. In addition, blank strips are automatically inserted when
you use the Make Stereo command to convert two mono in-
put channels into a single stereo channel, preserving the
channel layout.
Blank strips are strictly placeholders (no audio or any type or
processing take place), and therefore consume no additional
processing overhead or DSP resources.
Use blank strips to create obvious divisions between groups of
instruments, or to optimize the bank placement of inputs on
the console.
Blank strips are saved and loaded as part of the Show file.
Blank strips remain available during Backup Personality
mode.
Blank Strips on the Console
A blank strip has no LCD channel name display, and all of its
physical controls and indicators are inactive. Blank strip fad-
ers are set to the bottom (–inf) position and always revert to
this position if moved.
Blank Strips On-Screen
Blank strips appear as a simple gray strip with no fader, but-
tons or meter. A blank strip can be right-clicked to reveal its
context menu.
To copy GEQ settings, use the copy/paste GEQ shortcut or
use GEQ Presets. Use the Replace with Mix (members) From
command to replace output membership for an Aux, Group,
VCA, Matrix or PQ.
Snapshots cannot store and recall custom console channel
position.
Blank strip in position 16, Right-click menu shown
Blank Strip
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
