VENUE SC48 Guide
36
Banking the Output Section
Outputs are controlled using the Output faders and Encoders.
The Mains fader provides constant access to the house output
(Mains) bus, and does not follow Output fader banking.
To bank Auxes, Matrix, Groups, or VCAs to the Output faders:
Press the corresponding switch in the Output Faders sec-
tion.
Selecting and Targeting Channels
Each VENUE channel strip has a channel Select switch. The
Select switch targets that channel for routing or processing as-
signment. When a single channel is selected it becomes the
targeted channel, which can be adjusted from the console or
on-screen. Channels can also be selected by clicking their
fader strips on-screen.
To select a channel, do one of the following:
Press the Select switch on the console channel strip.
– or –
Click anywhere in the on-screen channel fader strip, except
on the fader, mute, solo or safe buttons.
Multi-Select (Shift)
Multi-Select lets you select multiple channels in order to apply
an action to them in one step.
To select multiple channels from the console:
1
Press and hold the Multi-Select switch (located next to the
input Bank switches). The switch flashes to indicate Multi–Se-
lect mode.
2
Press Select on each channel you want to include in the se-
lection.
3
Release the Multi-Select switch.
4
Perform a routing assignment or other function (for exam-
ple, press a Bus Assign switch on one of the included chan-
nels). The operation is applied to all selected channels.
To exit Multi-Select mode, do one of the following:
Press Cancel.
– or –
Press the Select switch on a channel that is currently not se-
lected.
To select multiple channels on-screen:
Press and hold the Multi-Select switch (or hold Shift on the
keyboard) and click the fader strips on-screen.
To select an 8-channel bank on-screen:
Click the bank name below the on-screen fader strips.
Shift-click to select additional banks or channels.
To select all input channels or all output channels on-screen:
Double-click any bank name below the on-screen fader
strips in the Input or Outputs screen.
To remove a channel from a selection:
Control-click (or Fine-click) a highlighted channel.
Bank switches for Output channels
Clicking on-screen to select a channel
Press to
assign faders
Select
Click to select channel
You can use the Shift key on the keyboard or the Multi-Se-
lect (Shift) switch to select multiple channels.
Clicking a bank display to select multiple channels on-screen
See “Screen Controls” on page 38 for additional on-screen
features.
Click to select
banks of 8
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
