VENUE SC48 Guide
112
Solo Operation Options
Momentary or Latching Switch Operation
Channel solo switches can operate with either momentary or
latching behavior.
To engage momentary solo on a channel:
Hold the solo switch for more than one second. Release the
solo switch to unsolo the channel.
To latch solo on a channel:
Press and release the solo switch. Press the switch a second
time to unsolo the channel.
Auxes Follow AFL and AFL Follows Auxes
You can customize how encoder banking and AFL selection
interact using the two settings for Auxes Follow AFL and AFL
Follows Auxes.
Auxes Follow AFL
The “Auxes Follow AFL” option is especially useful for moni-
tor mixing, because it provides instant access to any mix by
the soloing the mix output.
When this option is selected, soloing an Aux output bus (by
pressing its AFL switch) assigns the Aux Send level and pan
controls for that bus to be displayed on the input encoders.
• With mono Aux busses, Send level is assigned to the In-
put encoders. With stereo (linked) Aux busses, Aux Send
level is assigned to the encoders.
• When Flip to Faders is pressed, Send level is flipped to the
faders and send pan for the Aux (even numbered send) is
automatically mapped to the input encoders. The pan
button flashes while this mode is enabled.
To set Auxes to display send controls when soloed:
1
Go to the Options page and click the
Busses
tab.
2
Under
Solo and Monitor Operation,
select the
Auxes Follow AFL
option.
3
Solo an Aux output bus by pressing its AFL switch.
To cancel display of Aux send controls:
Unsolo the Aux bus. The Input Encoders return to their pre-
vious display.
– or –
Select any other parameter for the Input Channel encoders
to override the Aux follows AFL display. The encoders display
the selected parameter until another output is soloed.
AFL Follows Auxes
When the AFL Follows Auxes option is selected, assigning en-
coders to an Aux Send will automatically solo that Aux bus.
This speeds up AFL access, specifically for monitor mixing.
The AFL Follows Auxes option is set from the Solo and Moni-
tor Operations section of the Options > Busses page. By de-
fault, the option is off (not selected).
The AFL Follows Auxes setting is stored and recalled with each
Show file.
To set AFL to follow Aux encoder assignment:
1
Go to the
Options > Busses
tab and select the
AFL Follows
Auxes
option.
2
In the Input section, assign encoders to an Aux Send bus.
To cancel (unsolo) in AFL Follows Auxes mode:
Press the flashing Solo Clear button
Auto Cancel and Input Priority
The Auto Cancel option determines whether Solo switches
cancel other soloed channels or are additive (latching). The
Input Priority option determines whether soloed inputs re-
place soloed outputs on the AFL/PFL Solo bus.
Auto Cancel On, Input Priority Off
A solo cancels all other solos
(inputs and outputs)
Auto Cancel On, Input Priority On
An input solo cancels all
other soloed inputs; an output solo cancels all other output
solos; soloed inputs temporarily replace soloed outputs
Auto Cancel Off, Input Priority Off
Solos are additive, and so-
loed inputs and outputs are heard together
Auto Cancel Off, Input Priority On
Solos are additive, and so-
loed inputs temporarily replace soloed outputs.
If the encoders were already flipped to the faders, flipped
status is maintained when an Aux bus is soloed.
Solo and Monitor Operation settings in the Options > Busses page.
Auxes Follow
AFL
The Events List can be used to assign the Solo Clear func-
tion to a footswitch or any other available trigger.
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
