Specification
T1689 Technical Manual Rev 07
Standards
MV3000 Air Cooled DELTA
Page 72
2.17
STANDARDS
When installed in a CDM, in accordance with this manual, the DELTA components are designed to comply with
the standards listed below.
2.17.1
Safety
EN 50178
Electronic equipment for use in power installations.
EN 61800-5-1
Adjustable speed electrical power drive systems:
(IEC 61800-5-1)
Part 5-1-Safety requirements – Electrical, thermal and energy.
ANSI / UL508C
Power conversion equipment.
CAN / CSA C22.2-14
Industrial control equipment, industrial products.
2.17.2
Electromagnetic Compatibility (EMC)
EN 61800-3
Adjustable speed electrical power drive systems:
(IEC 61800-3)
Part 3 – EMC product standard including specific test methods.
In particular, this includes the following immunity requirements:
IEC 61000-4-2
Electrostatic discharge
6 kV contact discharge
8 kV air discharge
IEC 61000-4-3
Electromagnetic field
80 MHz – 2 GHz, 10 V/m
2 GHz – 2.7 GHz, 1 V/m
IEC 61000-4-4
Electrical fast
2 kV
transient/burst
IEC 61000-4-5
Surge
1 kV line-line
2 kV line-earth
IEC 61000-4-6
Conducted radio-frequency
150 kHz – 80 MHz, 10 V
2.17.3
Ratings/Performance
EN 61800-2
Adjustable speed electrical power drive
(IEC 61800-2)
systems:
Part 2 – General requirements - Rating specifications for low voltage
adjustable frequency power drive systems.
EN 60146-1-1
Semiconductor converters. General requirements
(IEC 60146-1-1)
and line commutated converters.
