Chapter 1
Installing a MEDIArray ZX4 Drive Enclosure
26
Turning On the MEDIArray ZX4 Hardware
You can now turn on power to your MEDIArray ZX4 hardware. The Fibre
Channel MEDIASwitch 16-4Gb has no Power switch. It turns on when you
plug the power cord into a power outlet.
1. Make sure the Power switch on each of the power supply modules is in the
on (|) position.
2. Open the front door on the MEDIArray ZX4 and push the Power switch.
It is a black push-button switch at the top center of the
MEDIArray ZX4.
n
It takes approximately 5 minutes for the boot sequence to complete before you
can turn on the File Manager and configure the devices.
