Configuring MOS Settings in Command
171
5. Set the default graphics style for playlists loaded from a MOS-based newsroom computer
system, if necessary.
Graphics styles are added at the Command Workstation via the Playlist category in the System
Settings dialog box. If none are added, then the list in the MOS > General category will appear
blank.
6. Select Channel Groups.
7. Click Add.
The Channel Groups dialog box appears.
8. Select a channel group.
9. Click OK.
MOS Setting
Description
Command MOS ID
The ID that enables enables bidirectional communications between a
MOS-based newsroom computer system and Command. For instance:
avid.command1.mos
or
avid.command2.mos
Newsroom NCS ID
Usually, this is set to the host name of the newsroom computer system’s
server.
Newsroom Host Name
Host name of the newsroom computer system’s server. The name entered
in this field must be resolvable via the Domain Name Service (DNS);
otherwise, an IP address can be used instead.
Buddy NCS ID
Usually, this is set to host name of the newsroom computer system’s
“buddy” or backup server. The name entered in this field must be
resolvable via the Domain Name Service (DNS); otherwise, an IP address
can be used instead.
Buddy Host Name
Host name of the newsroom computer system’s “buddy” or backup
server.
MOS version
Determines which version of MOS protocol Command will use.
Summary of Contents for MediaCentral Command
Page 1: ...MediaCentral Command Installation and Configuration Guide...
Page 192: ...Index 192...
Page 193: ......
