Avid Technology MediaCentral Command, Installation And Configuration Manual

Page: 152 / 194

Enabling the GPI Panel
152
Here are some of the most commonly used commands for selection-based playout:
- Play selection - Choose Playlist > Control > Play > Selection
- Stop selection - Choose Playlist > Control > Stop > Selection
- Cue selection - Choose Playlist > Control > Cue > Selection
n
If you program the GPI panel for these selection-based actions, you must enable the GPI panel at the
workstation.
7. Click OK.
8. Repeat steps 5 through 7 as needed.
9. Click Apply (if you want the System Settings dialog box to remain open after settings are
applied) or OK.
The system will prompt you for the administrator password.
10. Enter the administrator password and click OK. If there is no administrator password, leave the
field blank and click OK.
11. Confirm functionality by playing items in a playlist.
Enabling the GPI Panel
The GPI panel must be enabled to control a playlist if used for non-channel-specific, selection-based
actions that go through the Command user interface.