Configure a Failover Connection
133
4. Repeat this validation procedure clicking Validate Send on the Standby System Director and
Validate Receive on the other System Director.
Verify you are getting the same results (green indicators and correct number of received
packets).
5. Click Configure File System on the Standby System Director.
The File System Configuration dialog box opens.
6. Select Create Standby System Director and click OK.
The Avid ISIS System Director service automatically starts when complete. In the System
Director Control Panel, the “System Director is running” display turns green.
7. Click Start System Director on both the Active and Standby System Directors and close the
ISIS Control Panels on each system.
