Rack-Mounting the Equipment
42
Front Panel Screws
Mounting the Engine
The ISIS 2000 Engine is designed for 19-inch (483-mm) rack configurations and requires five
EIA rack units (5U), or 8.75 inches (222.25 mm) of rack space. The ISIS 2000 rackmount rails
are designed for racks with square or threaded holes. This procedure focuses on racks with
threaded holes. Additional instructions are included on a decal located on the side of one of the
bracket rails.
n
Do not lift the Engine by the handles on the power supply units, cooling modules or Engine
Controllers – they are not designed to take the weight.
w
Lifting the Engine with the drives, cooling modules, and power supplies installed can cause
an injury. The Engine must have all modules and drives removed prior to lifting. Avid
recommends that two people be used whenever lifting the empty Engine.
Rack enclosure
front mounting rail
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
