Engine
21
Engine Rear View
The following figure shows the rear of the Engine in a configuration that contains the following:
•
One Engine Controller (only supported in the left slot as seen from the rear of the Engine)
•
Five cooling Modules
•
Two power supplies
Cooling Modules
Five cooling modules are powered on when the power supplies are on. They contain fans that
cool the system. The system only needs three of the five cooling modules to supply the needed
cooling for the Engine to function properly. You can remove and replace a cooling modules
while the system is running if one fails.
Logical Status Indicator
Flashes amber when arrays are performing a background function.
When both the Module Fault and Logical Status LEDs are flashing, the
unit ID number is different from “Start of Day.”
Drawer 1 Fault Indicator
Illuminates amber when an fault is detected with a drive, cable, or fan in
the top drawer.
Drawer 2 Fault Indicator
Illuminates amber when an fault is detected with a drive, cable, or fan in
the bottom drawer.
Engine Control Panel (Continued)
Component
Description
Engine Controller
Cooling module (x5)
Power supply unit (x2)
10 Gb Connection
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
