Adding an ISIS 2000 Engine to Your Infrastructure
180
7. Connect a 10 Gb optical network cable to left 10 Gb port (as seen from the rear of the
Engine) on the Engine Controller of the ISIS 2000 Engine. No other 10 Gb port on the
Engine has been configured for this connection.
The 10 Gb port on the ISIS 2000 Engine Controller requires an SFP+ transceiver.
The following example shows the physical connections between a System Director, Engine,
and a Force10 S4810 switch.
Multiple Engines Network Connections
8. Connect the other end of your network cable to the appropriate port on your ISIS 2000
switch.
Depending on the type of switch you have, an X2 or SFP+ transceiver might be needed for
the switch port.
Summary of Contents for ISIS 2000
Page 1: ...Avid ISIS 2000 Setup Guide...
