Avid Technology FastServe Ingest, Setup Manual

Page: 101 / 103

101
• EN55103-1 E4
• EN55024
• EN55103-2 E4
• AS/NZS CISPR 32 Class A
• CISPR32 Class A
• VCCI Class A
• IEC/EN/UL60950-1
• CAN/CSA-C22.2 No. 60950-1-07
This equipment has been tested to comply with USA and Canadian safety certification in accordance
with the specifications of UL Standards: IEC/UL60950-1 and Canadian CAN/CSA-C22.2 No.
60950-1-07. Avid Inc. has been authorized to apply the appropriate UL & CUL mark on its
compliant equipment.
(EMC, Safety and RoHS)
Avid is authorized to apply the CE (Conformité Europénne) mark on this compliant equipment
thereby declaring conformity to EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
and RoHS Recast Directive 2011/65/EU.
FCC Notice
Class A Equipment
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at personal expense.
Cables
Connections to Avid hardware must be made with shielded cables with metallic RFI/EMI connector
hoods in order to maintain compliance with FCC Rules and Regulations.
Canadian ICES-003
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.