Avid Technology EXPANSION CHASSIS, Instructions For Installing And Using

Page: 43 / 98

I n s t a l l i n g a n d U s i n g t h e A v i d E x p a n s i o n C h a s s i s C h a p t e r 3 • E m p t y C h a s s i s I n s t a l l a t i o n 3 1
Setting the NuBus ID Rotary Switches
Each NuBus slot in the Expansion Chassis has a rotary ID selector switch. The
switch has an arrow showing the current ID setting, and numbers and letters
indicating the other possible settings for the slot (see Figure 20).
Figure 20: NuBus Slot Numbers and Rotary Switch Locations
You must match the settings of each rotary switch to the switch setting information
displayed by the Expansion View software. To change a NuBus slot ID:
1. Use the switch settings in the Switch Settings window on the Bin monitor.
2. Start with the leftmost switch and work to the right until all the switches are set.
Insert a small flat-blade screwdriver into the arrow in the center of the selector
switch (see Figure 21).
Figure 21: A NuBus Rotary Switch
Slot Numbers
NuBus Rotary
Switches
11 12 1 2 3 4 5 6 7 8 9 10
1
2
3
4
5
6
7 8 9
0
A
B
C
D
E
F