Using the Avid Adrenaline
42
Fibre Channel Support
Avid provides support for local storage or Avid Unity MediaNetwork using
the following Fibre Channel boards in the xw8000 system, G4 system, and
G5 system:
•
ATTO 2-Gb optical Fibre Channel (Model 3300, single channel)
•
ATTO 2-Gb copper Fibre Channel (Model 3305, single channel)
1394 Support
When you are using an Avid Adrenaline and you want to use 1394 (FireWire)
drives, you need a second 1394 OHCI board on a different bus segment in your
Avid editing system. See your computer manufacturer’s documentation to
identify a PCI bus slot that is on a different bus segment than the 1394 port
used for the Avid Adrenaline.
n
If you use a 1394 board in slots 3, 4, or 5 (PCI-X slots) in the xw8000 it must
be a “universal” PCI card and not a +5V-only board.
To determine the supported 1394 boards, go to
. Click your
product line (for example, Broadcast or Video Editing) and then click your
Avid application.
n
At this time, Avid has not qualified a FireWire 800 (or 1394b) drive to be used
with Avid Adrenaline systems. For the latest qualified storage products,
contact your local Avid Reseller or call the Avid Sales and Product
information line at 800-949-2843 for the latest information about available
drives.
Ethernet Support
At this time only the Alacritech
®
1-Gb board is supported. For supported
devices and configurations, go to
. Click your product line (for
example, Broadcast or Video Editing) and then click your Avid application.
n
You cannot use the built-in 1394 connection and the built-in 1-Gb Ethernet for
a Avid LANshare EX connection in the xw8000 system at the same time.
Summary of Contents for Avid Adrenaline
Page 54: ...Using the Avid Adrenaline 54...