Avid Technology Avid Adrenaline, Manual

Page: 11 / 54

Avid Adrenaline Front and Rear Panel
11
SD Video I/O Board Connectors
The following figure shows the connections on the SD video I/O board. The
following table describes the function of each connector.
n
Video signals are output to all analog video connectors during capture and
playback for client monitor use.
SD Video I/O Board Connectors
SD Video I/O Board Identifiers
Number Label Function
1 Reference IN (REF) Video reference input for a black burst or house sync signal, BNC
connector
2 Y, ANALOG IN (component) Analog component video input, Y luma, BNC connector;
connects to the Y video output of decks
3 PR, ANALOG IN
(component) Analog component video input, PR color difference signal, BNC
connector; connects to R-Y video output of decks
4 PB, ANALOG IN
(component) Analog component video input, PB color difference signal, BNC
connector; connects to the B-Y video output of decks
5 COMPOSITE, ANALOG IN Composite video input, BNC connector; connects to analog video
output of decks
6 S-VIDEO, ANALOG IN Super-video input, 4-pin connector; connects to analog video
output of decks
7 S-VIDEO, ANALOG OUT Super-video output, 4-pin connector; connects to analog video
input of decks
ANALOG IN ANALOG OUT
REF Y PR PB Y PR PB COMPOSITE
COMPOSITE
S-VIDEO
OUT
DV
HOST
LTC 1394
GAIN 2 GAIN 1
MONITOR
1
2
SDI IN SDI OUT SDTI OUT
IN
1 2 3 4 5
6
7 8 9
10
11
12 13
14
15
16
17 18 19 20 21
22
23