Avid Technology AirSpeed series, Installation And User Manual

Page: 271 / 282

D Regulatory and Safety Notices
Warnings and Cautions
c
Never install equipment if it appears damaged.
c
Disconnect the power cord before servicing unit.
c
Only perform the services explicitly described in this document. For services or
procedures not outlined in this document, speak with authorized Avid service
personnel.
c
Follow all warnings and cautions in the procedures.
c
Operate the device within its marked electrical ratings and product usage instructions.
FCC Notice
Part 15 of the Federal Communication Commission Rules and Regulations has established
Radio Frequency (RF) emission limits to provide an interference free radio frequency
spectrum. Many electronic devices produce RF energy incidental to their intended purpose.
These rules place electronic equipment into two classes, A and B, depending on the intended
use.
Class A devices are those that may be expected to be installed in a business or commercial
environment. Class B devices are those that may be expected to be installed in a home or
residential environment. The FCC requires devices in both classes to be labeled with the
interference likelihood and additional operating instructions. The rating label on the
equipment will show which class the product is (A or B). Class A product will not have an
FCC logo. Class B equipment will have an FCC logo. The information statements differ on
the two classes.