Avid Technology AirSpeed series, Installation And User Manual

Page: 241 / 282

Rear Panel Specifications
241
Rear Panel Specifications
This section describes the rear panel specifications of the AirSpeed Multi Stream chassis.
Rear Panel Specifications
Parameter Specification
Serial Remotes 1-8 Serial Remotes 1 - 8 are all RJ45 connectors, RS-422
EXPANSION PORTs 1 and 2
(Not for connecting VGA
monitors)
29-Pin female DVI connectors. Each Expansion port has 4 LTC out
BNCs (1 per SDI channel) along with a General Purpose I/O Pins
Connector (DB25).
LTC (IN/THRU) In: 1 BNC female connector
Loop through: 1 BNC connector
SDI In 2 BNC connectors for SD models
4 BNC connectors for MPEG-2 HD models
2 BNC connectors for DNxHD models
SDI Out 4 BNC connectors for SD models
6 BNC connectors for MPEG-2 HD models
4 BNC connectors for DNxHD models
Reference In 1 BNC connector
Reference Loop through In: 1 BNC connector
Loop through: 1 BNC connector
CONSOLE 1 RS-232 input (Avid use for diagnostic testing only).
VGA 1 VGA input (for a VGA monitor).