Avid Technology AirSpeed series, Installation And User Manual

Page: 214 / 282

7 Working with the Remote Console
214
Filtering on a Clip Name or Video ID
This topic contains information on filtering on a clip name or video ID.
To filter on a clip name or video ID:
1. To filter on a clip nameor video ID, type a portion or the full clip name or video ID you
want to filter on in the Filter, and press Enter.
2. (Option) If you want to change the default filter settings, you can also right-click on the
Filter field to bring up the Filter menu controls as shown in the following illustration:
The following table describes the options available in the Filter menu.
Filter Options
Option Description
All This is the default. If selected, whatever you type in the Filter field
applies to both video IDs and clip names.
Video ID If selected, whatever you type in the Filter field applies to Video IDs
only.
Name If selected, whatever you type in the Filter field applies to clip names
only.
Case Sensitive If selected, whatever you type in the Filter field must be case sensitive for
the filter to find a match.
For example, if you typed “Dog”, it would not find “dog”, and vice versa.