Monitoring Studio Transfers
197
The Transfer Status window opens.
Transfers display as one entry in Transfer Status window. Although multiple sequences
might be included in the transfer, the window displays status for the entire transfer. If one or
more members of the Studio are not available, the transfer immediately displays an Error
with corresponding text. An Error is displayed even if other Studio members are
successfully transferring.
If you have administrative privileges or you initiated the transfer, you can cancel, retry,
pause, or resume transfers. The following table explains the TransferManager Status
conditions.
TransferManager Status Descriptions
Status
Description
User Options
Transferring
At least one transfer is running and none
have failed.
Pause or cancel the transfer.
Paused
All transfers are paused.
Resume or cancel the transfer.
Error (plus
information
indicating the error)
At least one transfer has failed. As soon
as one transfer fails, regardless of the
state of any of the other transfers, the
transfer state is failed.
Retry or clear the transfer.
Pending
All transfers are pending.
Cancel the transfer.
Completed
All transfers have completed with no
failures.
Clear the transfer.
Canceled
All transfers have been canceled.
Clear the transfer.
Summary of Contents for AirSpeed series
