Avid Technology AirSpeed series, Installation And User Manual

Page: 164 / 282

5 Working with Clips
164
The control buttons (Stop, Pause, and Record) change to red when active in the MiniMonitor
while in Record Mode.
To turn off the recording process, do one of the following:
t
Right-click the MiniMonitor and select Playback Mode.
t
Play a clip to the same channel that you were previously recording to.
Copying or Moving Clips
You can copy or move clips from one AirSpeed Multi Stream Database to another over a
network in either of two ways: Drag and Drop or using the Clipboard.
To copy a clip from one database window to another database window:
1. From the Network Tree, open the Database from which you want to copy the files.
2. Again from the Network Tree, open the Database to which you want copy the files.
Stop
Pause
Record
Control Buttons
Button Description
Stop Stops recording of the clip. AirSpeed Multi Stream then saves the clip to
the active database.
Pause Temporarily stops recording of the clip. When recording is paused, click
on Record to resume or Stop to finish recording.
Record Starts or resumes recording of the clip.