Avid Technology AirSpeed series Installation And User Manual Download Page 130

Page: 130 / 282

Fundamentals

130

File Menu

The File menu contains the following submenus. Each is described in the following table.

File Menu Submenus

Option

Description

Open

Opens an existing database. For more information, see

“Opening a

Database” on page 125

Closes a currently selected database. For more information, see

“Closing

a Database” on page 126

Lock Database

Locks a currently selected database for exclusive use. For more
information, see

“Locking and Unlocking a Database” on page 126

Prints the contents of a database.

Print Preview

Displays the document on the screen as it will appear when printed.

Page Setup

Selects the page format and printer information.

Preferences

Accesses a series of system preferences. For more information, see

“File

> Preferences Menu” on page 131

Advanced

Accesses the Create Database and Restore Database commands. For
more information, see

“File > Advanced Menu” on page 133

Summary of Contents for AirSpeed series



























































































































































































































































































Search results

Summary of Contents for AirSpeed series

Reviews:

Related manuals for AirSpeed series

Brands by name

Popular brands

Avid Technology AirSpeed series, Installation And User Manual

Search results

Summary of Contents for AirSpeed series

Reviews:

Related manuals for AirSpeed series

Brands by name

Popular brands