Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 81 / 398

Cabling Up the AirSpeed Multi Stream
81
Connecting Control and Communications Cables
The following figure identifies the connectors used to connect the control and
communication cables. The illustration shows the rear of the MPEG-2 HD model. The
location of the control and communication connections is the same for all models. For the
exact location of the control and communication connectors, see
“Control Connections (All
Models)” on page 51 .
For more information, see the following topics:
• “Connecting USB Devices (Mouse and Keyboard)” on page 82
• “Connecting Ethernet Cables” on page 83
• “Connecting to AirSpeed Multi Stream Over the Network” on page 84
• “Connecting Expansion Port Cables” on page 85
• “Connecting Remote Serial Cables” on page 86
• “Connecting the Console Cables” on page 86
Expansion
Port 1
Expansion
Port 2
Console
VGA
USB
Ethernet
Serial
OUT
1 4 2 3 5 6 7 8
IN
1 2
IN
5
6
EXPANSION
PORT 1
EXPANSION
PORT 2
USB
CONSOLE
VGA
SERIAL
ETHERNET 1 2 3 4
1 2 3 4
5 6 7 8
OUT
REF
IN/THRU
LTC
IN/THRU