Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 320 / 398

10
Working with the Remote Console
320
Performing an Edit While Capture (EWC) with Auto Transfer
If you are in a Team configuration, you can use the Edit While Capture with Auto Transfer
workflow to enable the AirSpeed Multi Stream server to capture directly to your shared
storage workspace location configured in the Avid Service Configuration. The metadata for
these clips will also be transferred to the location defined in the Master clip location
(Standalone) field in the Avid Service Configuration.
n
This workflow can only be used with ISIS 5000 or ISIS 7000 shared storage. MediaNetwork
is not supported.
Before you can perform an EWC with Auto Transfer, make sure that your system has been
set up using the Team Configuration (standalone Transfer Manager with Shared storage).
Also, on the Default Templates tab in the Avid Service Configuration, make sure of the
following:
• In the “Ingest transfer workspace/project based on” field, make sure that the Destination
template that is selected includes the workspace that you want to transfer the media to.
• In the Master Clip Location (Standalone) field, select the ISIS workspace for which you
want the AAF file to be transferred to.
n
It is recommended that the location you select for the master clip location matches the
location you selected in the Workspace field of the Destination Templates tab of the Avid
Service Configuration.
To perform an Edit While Capture (EWC) with auto transfer:
1. From the AirSpeed Multi Stream Remote Console, start a Record. For more
information, see “Recording Clips” on page 305 .