Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 244 / 398

8
Working with Clips
244
Editing Clips Using the Item Properties Dialog Box
To edit a clip:
1. Right-click the clip headframe and select Properties from the popup menu.
The Item Properties dialog box appears.
2. Click the Clip tab.
The dialog box provides the following fields for data entry:
Item Properties — Clip Tab
Option Description
In The in-point of this clip.
Out The out-point of this clip.
Duration The duration of this clip.
Loop In The point in the clip where looping starts.
n
This functionality is available for SD, DNxHD, and AVC-Intra
clips only. You cannot loop MPEG-2 HD clips.
Master Clip Master clip, if any.
Base TC Base timecode used by the clip. If the Base timecode is changed, the
Timecoude source (TC Src) of a clip is reset to “None”.