Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 180 / 398

6
Setting Up for Team Configuration
180
Team Configuration
When AirSpeed Multi Stream is configured in the Team Configuration, it operates in
environments where you have shared storage without Interplay. In a Team configuration, the
AirSpeed Multi Stream application does not require Interplay to transfer media to storage.
The following table lists the minimum supported Editor and Transfer software versions
(Windows only, not Macintosh support) and the associated documentation.
All of the documentation for configuration is available on the Avid Knowledge Base. This
documentation assists users in configuration of the standalone TransferManager. The
Avid
Interplay Transfer Setup and User’s Guide , and the Avid Interplay Transfer v1.0 Readme are
available at the top level of the Avid Interplay Transfer CD-ROM.
n
You must be sure that your AirSpeed Multi Stream, ISIS storage, and your Avid editing client
system times are in close proximity to each other. Otherwise media might appear to be
offline.
n
For the latest versions of the documentation, see the Avid Knowledge Base. Go to
www.avid.com.
n
The terms “Interplay Transfer” and “TransferManager” refer to the server and Client
Transfer software included with your version of NewsCutter or Media Composer. Therefore,
these terms can be interchangeable when discussing the server or Client Transfer software
in general. However, when you are referred to other documents, you must look in the
document that relates to the actual product that you have in your environment (“Interplay
Transfer” or “TransferManager”).
System Requirements
Editor Version Transfer Software
NewsCutter v9.5.2 or later Avid Interplay Transfer Client v2.4 or later
Media Composer v5.5.2 or later Avid Interplay Transfer Client v2.4 or later
Symphony v5.5.2 or later Avid Interplay Transfer Client v2.4 or later