Aviat Networks ECLIPSE EDGE User Manual Download Page 44

Page: 44 / 274

Aviat Networks

Chapter 2. Eclipse Edge System Description

Providing the IP address of the radio is known, Portal PC connection

can also be established by entering a LAN compatible IP address on

your Portal PC.

For more information on the operation of the recessed button, refer to

IP Reset

Function on page 19

For more information on the DHCP server, refer to

DHCP Server Function on

page 66

Portal Configuration Screens for Edge

Portal configuration screens for Eclipse Edge are identical to those for other Eclipse
radios (where service functionality is the same).

• For information on Portal PC connection, refer to

Setting Up Portal on page 7

• For information on a recommended configuration process for a new IDUspe, refer to

Installation and Configuration Process on page 25

• For detail configuration data, refer to the relevant screens in Chapter 4.

Portal Diagnostics for Edge

The Portal Diagnostics screen functions for Eclipse Edge include:

• Event browser with report options.
• History, graphed and report, with capture options for 7 days worth of 15 minute data

bins, or one month of daily bins. Screens are provided for the Link and Ethernet

functions. The Link screen captures G.826, G.821, RSL and event data. The Ethernet

history screen captures throughputs, frame types, discards, errors and events.

• Alarms, with context-sensitive Helpset support for alarm description, probable

cause and recommended remedial actions

• For context sensitive help, Eclipse Online Help must be loaded on your PC.

Loading is a default tick option under the Portal installation file.

• G.826 link performance data and G.821 BER - with a built-in BER test function on

PDH tribs.

• Ethernet performance with RMON statistics per port and channel.
• System Controls, with safety timers, for setting loopbacks, AIS, protection locks, Tx

mute. For the Ethernet modules, data dashboard screens present Tx and Rx

throughputs, discards and errors for each of the ports and channels.

• Information on serial number, part number, and time in service.
• Software reset and history-clear functions.

Refer to

Diagnostics on page 80

For a list of troubleshooting processes supported within the Portal Diagnostic
screens, refer to

Using Portal Diagnostics Screens for Edge on page 24

Summary of Contents for ECLIPSE EDGE



















































































































































































































































































Search results

Summary of Contents for ECLIPSE EDGE

Reviews:

Related manuals for ECLIPSE EDGE

Brands by name

Popular brands

Aviat Networks ECLIPSE EDGE, User Manual

Search results

Summary of Contents for ECLIPSE EDGE

Reviews:

Related manuals for ECLIPSE EDGE

Brands by name

Popular brands