AVG EZTouch I/O Jr. Manual Download Page 3

Page: 3 / 52

EZTouch I/O

Jr.

3 / 52

Warnings

Programmable control devices such as the

EZTouch I/O

Jr. are not fail-safe devices and as such

must not be used for stand-alone protection in any application. Unless proper safeguards are

used, unwanted start-ups could result in equipment damage or personal injury. The operator

must be made aware of this hazard and appropriate precautions must be taken.

In addition, consideration must be given to the use of an emergency stop function that is

independent of the

EZTouch I/O

Jr.

The diagrams and examples in this user manual are included for illustrative purposes only. The

manufacturer cannot assume responsibility or liability for actual use based on the diagrams

and examples.

Trademarks

This publication may contain references to products produced and/or offered by other

companies. The product and company names may be trademarked and are the sole property

of their respective owners. AVG Automation disclaims any proprietary interest in the marks

and names of others.

Manual part number EZ-TPLCJR-M

No part of this document shall be copied, reproduced, or transmitted in any way without the

prior written consent of AVG Automation. AVG Automation retains the exclusive rights to all

information included in this document.

Designed, Built and Marketed by AVG

4140 Utica Ridge Rd. · Bettendorf, IA 52722-1327

Phone:

1-877-774-EASY

· Fax:

1-877-775-EASY

www

.ezautomation.net

EU Information

The

EZTouch I/O

Jr. is manufactured in compliance with European Union (EU) Directives and

carries the CE mark. They been tested under CE Test Standard #EN55011, and is submitted for

Certification.

Products with CE marks perform their required functions safely and adhere to relevant

standards as specified by EU directives provided they are used according to their intended

purpose and that the instructions in this manual are adhered to. The protection provided by

the equipment may be impaired if this equipment is not used in accordance with this manual.

Only replacement parts supplied by AVG Automation or its agents should be used.

Technical Support

Consult Panel Editor Programming Software Help. You may also find answers to your questions

in the operator interface section of our website @ flash.ezautomation.net. If you still need

assistance, please call our technical support at 1-877-774-EASY or FAX us at 1-877-775-EASY.

SELV Circuits

All electrical circuits connected to the communications port receptacle are rated as Safety Extra

Low Voltage (SELV).

Summary of Contents for EZTouch I/O Jr.




















































Search results

Summary of Contents for EZTouch I/O Jr.

Reviews:

Related manuals for EZTouch I/O Jr.

Brands by name

Popular brands

AVG EZTouch I/O Jr., Manual

Search results

Summary of Contents for EZTouch I/O Jr.

Reviews:

Related manuals for EZTouch I/O Jr.

Brands by name

Popular brands