AVG EZTouch I/O Jr. Manual Download Page 26

Page: 26 / 52

EZTouch I/O

Jr.

26 / 52

Programming the

EZTouch I/O

Jr.

Create a Project

This section outlines the basics of creating a project using the

EZ-PANEL-EDIT

software. Further programming information for the

EZTouch I/O

Jr. is located in the

Touch Editor

Software Manual

and the

EZ PLC Software Manual.

The

EZTouch I/

Jr. uses a subset of the instructions described in the manual. For a complete listing

of all RLL instructions supported by the

EZTouch I/O

Jr. please review the

Appendix

Launch your EZ

Touch

Editor and select how you would like the program to link to

the

EZTouch I/O

Jr. unit. For this scenario, you can select 'Edit Program OFF-LINE.' This

will enable you to create a program without having the

EZTouch I/O

Jr. unit connected

through the serial port or the Ethernet connection.

Note

: The steps outlined below are based on the EZPanel Editor version 5.9 and

may vary slightly between versions.

1. Enter a project name (e.g. Test). Click OK.

Next select

EZTouch I/O

Jr. from the drop-down list under Panel Family. Once

EZTouch I/O

Jr. is selected, the other fields will populate.

3. Choose the appropriate I/O model (22 or 28) and click OK to launch the

editing software program. The Main Project Window will then appear

showing both the PLC and Panel sides to the program. These two sections of

the program work together to create a

EZTouch I/O

project.

Summary of Contents for EZTouch I/O Jr.




















































Search results

Summary of Contents for EZTouch I/O Jr.

Reviews:

Related manuals for EZTouch I/O Jr.

Brands by name

Popular brands

AVG EZTouch I/O Jr., Manual

Search results

Summary of Contents for EZTouch I/O Jr.

Reviews:

Related manuals for EZTouch I/O Jr.

Brands by name

Popular brands