18
ZP900 Post Scales User Instructions
Introduction
2.7 Accessing the menus
Follow these steps to access the various menus in the indicator.
1.
With the indicator powered up and in normal operating mode, press and hold
the
F1
key …
Pass
is briefly displayed, then a flashing
0
, prompting you to enter the
password.
2.
Use the
to key in the password for the
menu you want to access and press the
ZERO
key to accept it …
The first item in the top level of the menu you accessed is displayed.
3.
Use the navigation keys, shown below, to navigate through the menu
structure. The symbols appear on the bottom of the keys.
Menu Navigation Keys:
2.8 Exiting the menus
1.
When in the configuration selection of a menu you must press either the
ZERO
key to accept or
F1
to not accept the choice or value. Then press the
UP arrow
key repeatedly until …
SAVE no
is displayed.
2.
Use the
LEFT arrow
or
RIGHT arrow
key to scroll through these choices:
SAVE no
,
SAVEYES
and
CAnCEL
.
If you choose
SAVE no
any changes made will not be saved on exit.
If you choose
SAVEYES
then the changes will be saved on exit. When
SAVEYES
is selected the indicator will also attempt to auto-zero the
scale. Refer to
If you choose
CAnCEL
, the indicator remains in the menu.
Press
to move down in a menu
Press
to move up in a menu, except at the bottom
item in a menu, then use
ZERO
/
or
F1
Press
to move left in a menu
Press
to move right in a menu
Press
ZERO
/
to accept a value or choice and move
up in the menu.
Press
F1
to escape and move up in the menu
