Avery Weigh-Tronix GSE 460, User Instructions

Page: 31 / 48

60 Series User Instructions 29
3.2 Parts Counting
The counting parameter must be enabled before using. Follow the instructions below
for sampling and counting parts. A new sample must be performed for each unique part
being counted. The indicator will not store the average piece weight.
3.2.1 Simple keypad sample (model 460)
Method 1: Sample 10 pieces (parts) and count additional parts
1. Press [SELECT] until Qty is displayed.
2. Place the empty container on platform (optional). If a container is not being
used, skip this step and go to step 3.
3. Press the [TARE] key. The model 460 indicator will tare to a zero net weight.
4. Place 10 parts on the platform.
5. Press [TARE] to accept the sample.
6. Add additional parts to be counted. This number of parts added will be
displayed.
Method 2: Sample and count a specific number of parts
1. Press [SELECT] until Qty is displayed.
2. Place the empty container on platform (optional). If a container is not being
used, skip this step and go to step 3.
3. Press the [TARE] key. The model 460 indicator will tare to a zero net weight.
4. Place the specified number of parts on the scale. ( Add XX , "XX" being the
number of parts to sample) or key in the number of parts being sampled by
pressing the [PRINT] key until the first digit is displayed. Use the [UNITS] key
to move to the next digit. Continue using the [PRINT] and [UNITS] keys until
the desired sample size is displayed and press [TARE].
5. Press [TARE] to accept the sample. (Or add any number of parts, key in the
number added, then press [TARE]).
Method 3: Sample and count with a known container weight
1. Press [SELECT] until Qty is displayed.
2. Place the full container of parts on the weigh platform.
3. Press the [TARE] key.
4. The indicator will tare to a zero net weight. The display shows the current net
weight and prompts
Add 10
5. Remove the specified number of parts from the container.
6. Press [TARE].
7. The indicator calculates the piece weight of the sample parts removed.