Avery Weigh-Tronix FLI 225, Service Manual

Page: 34 / 110

34 FLSC 05 w/FLI 225 Instrument Service Manual
9 Setup Manager Module
The Setup Manager module is only available when you access the Admin
Management menu (password 522). For more information on how to access the
menus, see Overview of the Menus and Modules on page 15.
1. Access the Admin Management module as explained on page 16 using
password 522.
2. Press the Enter softkey.
The following screens are displayed.
Figure 9.1 Screen 1 (left) and 2 (right) of Setup Manager
3. Press the Up or Down Arrow softkey to highlight an option.
4. Press the Enter softkey.
5. Make all necessary changes.
6. Press the Esc softkey to return to Admin Management when finished.
The Setup Manager module contains the following items:
Calibrate Select Calibrate to set gravity compensation, set zero,
set span, perform corner and angle calibration. See
Calibrate the FLSC 05 with FLI 225 on page 36 for details.
Scale Select Scale to configure the various components of:
Units, Settings, Filter, Motion/AZT, Ranges and System.
See
Scale on page 55 for details.
Communications Select Communications to configure the various
communications ports. See Communications on page 64
for details.
Print Strings Select Print Strings to edit the print strings and configure
the strings to print. See Print Strings on page 66 for
details.
Application Selection Select Application Selection to choose the application:
Classic w/Print, Classic w/Accum or Expanded . See
App Selection on page 72
Country Code Select Country Code to pick the area, NA (North
America) or EU (European Union) where the instrument is
used. See
Country Code on page 73 for details.
Miscellaneous Select Miscellaneous to set up the inputs, reset the
system, run diagnostics or reset passwords. See
Miscellaneous on page 74 for details.