B240 Counting Scale User Instructions
23
3.10.2 Creating new parts in the database
The data base is very flexible and ideal for storing a wide range of product data.
Creating new parts in database is explained below.
1.
Press the
SETUP
key
.
The setup screen appears:
2.
T
ouch the
ID
key,
.
The ID setup screen appears. Below is an example screen:
This allows you to create
, edit
or delete
parts in the database. Touch a name to highlight it for editing
or deleting. Touch the Search box at the top to find an existing part in the
list.
3.
Press the
key.
An information entry window pops up allowing you to enter information
for the new product. Below are the most commonly used fields for
counting or checkweighing:
l
Serial Number
The scale will assign the next consecutive data slot to
the part number entered into the scale from 0001 to
9999.
l
Product Code
Mainly used to store Barcode data for the part or item
being stored. If the part has only one barcode number
from start to finish this can be entered in full. If this
barcode is used to identify different parts of the build as
the product goes though different processes, this
product code may be just the first 4 digits of the
barcode. See section
Code Settings and trace codes
for more information.
