background image

Paxar® is a trademark of Paxar Corporation. 
Monarch

®

, MonarchNet2, 7411, and 9855® and 9860 are trademarks of Paxar Americas, Inc. a subsidiary 

of Avery Dennison Corp.  Avery Dennison

®

 is a trademark of Avery Dennison Corp. 

Microsoft, Windows, and NT are trademarks of Microsoft Corporation. 
Novell and NetWare are trademarks of Novell, Inc. 
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc. 
Other products are trademarks or registered trademarks of their respective  
companies and are hereby acknowledged. 

TC7411MN2SG  Rev. AC  12/07 

©

2006 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. 

 

All rights reserved. All rights reserved.

 

E T H E R N E T   S E T U P   G U I D E

 

The Monarch

®

 7411

 wireless Ethernet Print Server lets you communicate 

with a Monarch

®

 9855® or 9860™ printer on a 10baseT or 100baseTX wired 

Ethernet network or on an 802.11b or 802.11g wireless network.  The print 
server operates in Ad-Hoc (peer-to-peer) mode or infrastructure (access 
point) wireless mode.  You can also remotely manage and download print 
batches, formats, printer configurations, and fonts.  MonarchNet2™ software 
is available on your printer for a licensing fee. Contact your sales 
representative for more information about MonarchNet2, or visit our Web 
site (

www.paxar.com

).  

The print server supports multiple network protocols for users with 
Telnet/FTP, Microsoft

®

 Windows

®

 98, 2000, NT

®

, XP, and Vista™, TCP/IP 

(including LPR/LPD, Bootp, DHCP, and HP JetDirect

), Novell

®

 NetWare

®

 

and SNMP.  All protocols are simultaneously active.   

Note: 

When turning on the printer or after sending a ^PR (printer reset) 
immediate command, wait at least 30 seconds before sending data 
to the print server.  Any data sent to the print server before the  
30-second interval may be lost. 

S e t t i n g   U p   t h e   P r i n t   S e r v e r  

From the Main menu, select Setup, Port Settings, then Parallel Comm.  
Then, follow these steps: 

1. 

Press 

 or 

 until you see 

 PARALLEL COMM 
  

  Port  

 

2. 

Press 

Enter/Pause

.  Press 

 or 

 until you see 

 PORT 
 

 

 Internal 

Summary of Contents for Wireless Ethernet Print Server Monarch 7411

Page 1: ...twork The print server operates in Ad Hoc peer to peer mode or infrastructure access point wireless mode You can also remotely manage and download print batches formats printer configurations and fonts MonarchNet2 software is available on your printer for a licensing fee Contact your sales representative for more information about MonarchNet2 or visit our Web site www paxar com The print server su...

Page 2: ... IEEE1284 and press Enter Pause This selects IEEE1284 for bi directional Ethernet communications Compatible mode is used with a computer connection and a parallel cable Set the Port to External if you want to use the parallel port Note Turn the printer off and back on after changing the parallel port communications mode so the printer can initialize with the new port setting Test Button not all mo...

Page 3: ... activity Yellow off no Ethernet connection solid Ethernet link wired 100baseTX blinking network activity Green off no Ethernet connection solid wireless link blinking network activity Yellow Green off no wireless connection If using network version CTMO xxx limited quantity produced two LEDs indicate the following activity LED Indicators Status device ready Ethernet link solid wireless link Green...

Page 4: ...example 192 0 0 192 on your computer and press Enter Pause on the printer If you are not sure of your printer s IP address print a configuration label The printer s display shows the N network symbol or the antenna symbol when the printer is connected and ready to receive data Note A MonarchNet2 manual is available and included in the licensing fee Contact your sales representative for more inform...

Reviews: