Avery Dennison Monarch Tabletop Printer 2, Reference Manual

Page: 87 / 206

Classification: Avery Dennison – Public Defining Field Options 4-7
U s i n g O p t i o n 6 ( U p l o a d F i e l d D a t a )
Upload data from any field us ing Option 6. W hen uploading m ultiple fields of data, the data is
c om m a s eparated.
Apply Option 6 to an RFID field to upload EPC data and the TID (tag identifier) data. To upload
TID data, enable s ingulate m ode; otherwis e, an error 737 oc c urs . See “
Defining the RFID Setup
Pac ket ” for m ore inform ation.
Note : W hen uploading both EPC and TID data, the TID data is always firs t, followed by a
c om m a, then the EPC data; regardles s of Option 6 ordering within the form at.
Data is uploaded to the las t port that rec eived hos t data (s erial, USB, or Ethernet) at the end of
the batc h or label, as follows :
Uploading Data
Batch Qty Option 6 Option 60 Re sult
1 Yes
R,6 ,H|
R,6 ,H,T|
No
EPC data is uploaded at the end of the batc h.
TID data is uploaded at the end of the batc h.
>1 Yes No Uploads the las t data or uploads the data prec eded
by an error m es s age.
>1 Yes
R,6 ,H|
R,6 ,H,T|
Yes
(R,6 0 ,I,1|)
EPC data is uploaded after eac h label.
TID data is uploaded after eac h label.
>1 Yes
R,6 ,H|
R,6 ,H,T|
Yes
(R,6 0 ,I,0|)
EPC data is uploaded after eac h label.
TID data is uploaded after eac h label.
Note: NO inc rem enting is perform ed.
Note : Option 60 ( R,6 ,I,0 | ) c an be us ed anywhere in the form at.
If a printing or enc oding error oc c urs , the uploaded s tring begins with “ERROR xxx”
before the data. This uploaded s tring,
ERROR 7 5 0 3 0 3 4 2 57BF40 0B78 000 A0 011 1 indic ates
the printhead is overheated and inc ludes the EPC data.
In s ingulate m ode, if an errors oc c urs while reading the TID, no TID data is uploaded.
Uploading the label or batc h’s data oc c urs when a label is s uc c es s fully printed (or there
is an error).
Syntax R,6 ,de vice ,type |
R1. R Option Header.
R2. 6 Option 6 .
R3. dev ic e Las t port that rec eived hos t data. Us e H (hos t). To upload EPC
data, apply this option to an RFID field.
R4. ty pe Type of data to upload. Us e T to upload the TID (tag identifier).
Configure the RFID Setup Pac ket to enable s ingulate m ode firs t.
Exam ple
T,2 ,1 0 ,V,25 0,50,0,1,1,1,B,C,0,0,0 |
R,6 ,H |
Uploads the text field’s data to a file.