94
6.1 A
CCESS
VIA
A
W
EB
/FTP
SERVER
ALS
20X
256
6.1.2
FTP server
Applications
The file transfer protocol (FTP) server (RFC959) ena-
bles access to the labeller's internal RAM disk and to
the compact flash card in the card slot of the labeller (as
long as there is a compact flash card in the slot).
In this way, files (configuration or firmware files) can be
saved to the CF card or the internal RAM disk, or exist-
ing files renamed or deleted.
The FTP server is multi-session compatible.
The FTP server should not be heavily used
during a high performance application of the
labeller.
Prerequisites
– Labeller is connected to network
– A valid IP address is assigned to the dispenser (by
the network administrator or by a DHCP server)
–
INTERFACE PARA >NETWORK PARAM. > FTP server
must
be set to “Enabled”.
– FTP client is installed on the host computer.
– The FTP connection is
not
blocked by a firewall
The following FTP clients are enabled for com-
munication with the internal FTP server:
– GNU Midnight Commander 4.6.0
(OS: Linux)
– WS-FTP Pro 5.0 (OS: Windows NT,
Windows 95)
– Microsoft Internet Explorer (IE) 5.0, 5.5, 6.0
(OS: Windows NT, Windows 95)
Starting the FTP server using the IE
Note down the IP address of the labeller
– This is shown under
INTERFACE PARA >NETWORK
PARAM. > IP address
Start internet browser.
Enter the following in the address bar [99A]:
ftp://[IP address without initial zeroes]
– Example: IP address = 144.093.029.031
Enter: ftp://144.93.29.31
An input field for the user name and password appears.
Enter user name and password.
– A user name can be chosen at will; preset password
= “avery”
– Change the password under
INTERFACE PARA >NET-
WORK PARAM. > FTP Password
[99] User interface of the IE after starting the FTP server.
A
Summary of Contents for ALS 204
Page 1: ...ALS 204 206 256 SERVICE INSTALLATION MANUAL Labeller Edition 8 3 2012 Original version ...
Page 2: ......
Page 223: ......