35146AR
27
Software Upgrade
By default, ProConnect will allow you to download and install updates direct from AvertX Connect. Updates can
also be performed manually via selected files or custom URLs. If an update is available, the user will see a
message along with an option to install. The message will display the update version and whether the update is
recommended or critical.
Update via AvertX Connect
1. Click
Setup
, and then click
Settings
.
2. Click the Software Upgrade tab.
3. Click the
Check For Update
link.
4. Click
Install
if an update is available.
Note
ProConnect checks for updates on startup, every 6 hours, or when the Check For Update link is
clicked.
Update via Manually Selected File
1. Click
Setup
, and then
Settings
.
2. Click the Software Upgrade tab.
3. Click Show More Options.
4. Click
Select File
then navigate to the location of the
.ssp upgrade file.
5. Click
Install
.
Note
Do not leave this page until the update is complete
Update via Custom URL
1. Click
Setup
, and then
Settings
.
2. Click the Software Upgrade tab.
3. Click Show More Options.
4. Click Specify URL.
5. Type or copy the
URL
where the upgrade file is located.
6. Click
Install
.
Note
Do not leave this page until the update is complete.
Note
AvertX
strongly recommends
that users be managed through AvertX Connect rather than on the
local recorder. If the device is AvertX Connect enabled, it will be necessary to log in to AvertX Connect
User Management to manage users who have access to the recorder. Users added this way will have
an AvertX Connect account.