Ver 1.4
Page 15 | 30
Loris X2 Configuration Guide
5.3.
MQTT Configuration
1.
Click on
“
System Settings
”
and then Click on
“
Device Settings
”
2.
Change the following setting as per your requirements:
•
MQTT Server Address: Address of MQTT server
•
MQTT Username: Username of MQTT server. If the MQTT server does not have username
leave it blank.
•
MQTT Password: Password of MQTT server. If the MQTT server does not have password
leave it blank.
•
MQTT Server Port: Default port is 1833. Change as per requirements
•
Keep Alive Timeout : Keep alive packet
•
MQTT Topic: Topic on which data will be posted
Figure 17 Loris X2 MQTT Configuration