Ver 1.4
Page 8 | 30
Loris X2 Configuration Guide
3.
Active Passive POE selection (Optional)
By default, the Loris X2 is ship in Passive POE mode. Although most of the Active POE switch support the
mode but it is recommended to switch Loris X2 in Active POE mode when using Active POE switch.
Follow the steps to change the Loris X2 to and from Active POE mode.
1.
Remove the rubber pads and unscrew the screw to open the back cover.
Figure 6 Loris X2 Screws placement
2.
Insert the jumpers on Passive POE Connecter.
Figure 7 Loris X2 Passive POE Configuration