manualshive.com logo in svg

Avermedia XR8032, User Manual

Share
Download
Avermedia XR8032 User Manual Download Page 49

 

43

 

Upload file to remote computer thru FTP (File Transfer Protocol). To setup click 

Detail 

(see also 

3.9.5

). 

-

 

Start Recording 

Record the video from the selected camera. To setup click 

Detail 

(see also 

3.9.6

). 

-

 

SMS (Short Message Service)/MMS (Multimedia Messaging System) 

SMS transmits only text messages to mobile phone. MMS transmits text 
messages and images over wireless networks using the wireless application 
protocol (WAP). Make sure your mobile phone support this feature and your PC is 
connected to GSM/GPRS modem. To setup click 

Detail 

(see also 

3.9.7

). 

-

 

PTZ preset point 

Position the PTZ camera based on the preset point setting. To setup click 

Detail 

(see also 

3.9.8

). 

-

 

Alarm SOP (Standard Operation Procedure) 

List the instructions to inform the person of what to do when the alarm is activated. 
To setup click 

Detail 

(see also 

3.9.9

). 

-

 

Send to CMS (Central Management System) 

Enable/disable the selected camera to send video to CMS when the alarm is 
activated (see also 

3.9.10

) 

-

 

Launch Program 

To call up the external program that is provided by 3

rd

 party. Click 

Detail

 and click 

  to locate the program path. Enable 

Multiple instance

 check box to allow the 

program can be executed many times at the same time. 

-

 

Snapshot 

Take a snapshot when the alarm is 
activated. 
a. 

Select Camera: 

specify which channel 

video to be snapshot when the alarm is 
occurred.

 

-

 

Alarm Camera: 

when a channel 

has an alarm occurred, and then, 
the DVR system will snapshot the 
channel video.

 

-

 

Camera # (1~32): 

the selected 

channel would be snapshot when 
an alarm is occurred.

 

b. 

Video Size: 

select the size of snapshot picture.

 

c. 

Number of picture: 

the number of picture that is going to be taken.

 

d. 

Snapshot Interval: 

a time gap for next snapshot

 

e. 

Save Path: 

a storage path for saving snapshot pictures. 

3.9.1 

To Setup Alarm Relay:   

1.  Beside the Relay Output check box, click 

Detail

. 

2.  In the Alarm Relay dialog box, select from the available 

relay list and in the ON column, set to enable/disable the 
relay operation when the alarm is activated. 

3.  In the Retrieve time check box, you may enable/disable to 

extend the relay operation time and set the duration in 
second. 

4. Click 

OK

 to exit and accept the setting and 

Cancel

 to exit 

without saving the setting. 

 

Summary of Contents for XR8032
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands