13
1.5.2 Installing a Removable Hard Drive Case in a PC (Optional)
For users who purchase an optional hard drive case, please follow the steps to
install the case in a PC.
1. Power off your PC and remove the cover of your PC.
2. Remove a front cover and free a 5 1/4” drive bay. Insert the hard disk holder.
Mount the hard disk holder, screw up the holder, and connect the IDE slot and
power connector from PC’s motherboard.
3. Remove the drawer of the removable hard disk case. Please refer to
1.5.1
Installing Hard Drives
to install the hard drive.
4. Slide the drawer into the removable hard disk case, power on the PC and
check the LED indicators. If the LED indicators light up, it is ok to use the hard
drive in the removable case.
1.5.3 Connecting Devices
At the back panel of the DVR unit, you can connect up to 4 video cameras, 4
sensor devices, 1 audio input and 1 alarm device. Please follow the illustration to
connect devices. To listen to a real-time audio channel, you can connect 1 PC
speaker to DVR. Use a USB cable to connect to a PC if it is necessary.
