Avermedia AVerVision SPB370, User Manual

Page: 7 / 27

E-3
English
Deutsch
Français
Italiano
Es
pa
ñol
Č
esky
M
M
a
a
k
k
i
i
n
n
g
g
t
t
h
h
e
e
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The ports on the rear, left and right panel of SPB370 enable you to connect the unit to a
computer, graphics display monitor or LCD/DLP projector, TV or other device. Illustrated
below are the ports that are located at the rear and right panel of SPB370 with their
corresponding labels.
Rear Panel
(1) (2) (6) (7) (5) (4) (3)
RGB
OUTPUT
DC 12V VIDEO
OUTPUT
S-VIDEO
OUTPUT
DVI-I OUTPUT USB SD CARD
Name Function
(1) DC 12V
: Connect the power adapter into this port.
(2) RGB output
: Output the signal from the camera, RGB IN port, or the
captured images from the memory source on a VGA/Mac
monitor or LCD/DLP projector.
(3) S-Video output
: Output the signal from the camera or the captured images
from the memory source on TV or Video equipment.
(4) Video output
(RCA/Composite)
: Output the signal from the camera or the captured images
from the memory source on TV or Video equipment.
(5) DVI-I output
: Output the signal from the camera, RGB IN port, or the
captured images from the memory source on a VGA/Mac
monitor or LCD/DLP projector with DVI-I interface. If the
display device does not support DVI-I, it can only display
the signal from the camera and the captured images.
The1920 X1080 resolution for DVI-I support reduced
blanking only.
(6) USB
: Use SPB370 as a USB Camera or Mass Storage to
transfer the captured images from SPB370 memory
source to PC.
(7) SD card slot
: Insert the SD card with the label facing up. It can support
16MB~2GB card capacity and only accepts FAT16
formatted card.
Left Panel
(1) (3) (2)
LIGHT BOX MIC IN VIDEO OUTPU T
SPB370
TV RGB
Name Function
1. MIC IN
: Connect a 6.3mm jack microphone into this port.
2. VIDEO OUTPUT : Select to output video signal between RGB (RGB & DVI-I)
or TV (Composite Video/S-Video) display output.
3. LIGHT BOX
: Turn on/off the
light box.