18
1.
Click the
Setup
button
and in the
Setup
dialog box, click on the
Remote Remapping
→
Remote Source Control
icon on the left pane.
2.
Select the signal source that you want.
3.
Click the
UP
or
DOWN
button
at the right side until the selected signal reaches the
location you desire.
4.
Click
Apply
to save the settings. Or click
Default
to revert to the factory setting.
(This picture is only for reference.)
3.12
Changing the OSD Attributes
Click the
Setup
button
and in the
Setup
dialog box, click the
Personalise
icon on the left
pane. On this page, you can customize the curtain effect, LCD speed or change the appearance
of the TV monitor and the control panel (Skins).
(This picture is only for reference.)
