AVer TR313V2, User Manual

Page: 36 / 66

28
Preset Setting
Set up preset position and view preset position.
1.
Select the Preset tab in live view page.
2.
Use , , , and to adjust camera view position and use and to zoom.
3.
Enter preset position number (0~255) in Save Preset column and select Save to save the
position.
4.
To call the preset position, enter a preset number (0~255) in Load Preset column or select the
preset number (0~19) from Quick Call section. (Recalling preset will disable auto tracking.)
5.
Video Freeze with Preset: Turn On/Off the screen view freeze function. When Video Freeze with
Preset is on, during the preset operation, the screen will freeze until the operation is done.
6.
Preset Speed: Adjust the preset speed.
Tracking Control
Enable/disable tracking function, select tracking mode, and operate one-click tracking function.
◼ Tracking Mode (Tracking mode setup refer to Tracking Settings section)
➢ Presenter: Enable tracking function and select Presenter mode. Camera will start tracking
when human shows on camera if human goes away and camera will return tracking point.
➢ Zone: Enable tracking function and select Zone mode. Camera will start tracking when object
is moving between the preset tracking block area.
➢ Hybrid: Enable tracking function and select Hybrid mode. This mode allows the user to use
Presenter and Zone modes at the same time. When the presenter enters selected preset
points, it will change to Zone position. When the presenter leaves the preset points, camera
will follow presenter to do Auto Tracking function.