AVer PTC310HWV2, User Manual

Page: 33 / 66

26
Web Setup
Connect the camera from a remote site through the internet.
Access the Web Interface of the Camera
To access the Web interface of the camera, you have to find the IP address of the camera using AVer
IPCam Utility or AVer PTZ Management software.
Accessing the Camera via AVer IPCam Utility
To find the IP address of your cameras using the IPCam Utility installer, follow the steps below.
1. Download the IPCam Utility from https://www.aver.com/download-center and run the IPCam Utility.
2. Click Search , and all available devices will be listed on the screen.
3. Select a camera from the list, the camera info will be displayed in the Settings field.
[Note] The default network of the camera is Static IP (192.168.1.168) and default ID/Password are
admin / admin . If you want to configure the network to DHCP, input the ID/Password in the Login
field, select the “camera model” on the list, select “DHCP” and then click the
Apply button.
4. To access the Web interface, double-click on the IP address in the IPv4 Address column.
For the first-time user, you will be prompted with a Login window to change the ID and password.